Merge branch 'fix/gitattributes-stray-cr'

The previous commit wrote a literal carriage-return byte into a comment, where
the text was meant to show the two characters backslash-r. Git's content sniffing
treats a lone CR as a sign of binary data, so .gitattributes itself was classed
-text (git ls-files --eol reported i/-text): the one file in the repository
that the new LF policy could not normalise.

The rules themselves were never affected - the byte sat inside a comment, and
deploy.bat and the sources were already checking out with the intended endings.

The comment now says "a trailing CR byte" in words. .gitattributes reports
i/lf w/lf, and `git add --renormalize .` stages nothing else.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1

.gitattributes

@@ -1,4 +1,20 @@
-# Shell scripts must keep LF endings. core.autocrlf=true on Windows would
+# Line endings: LF in the repository and in every working tree, on every OS.
-# otherwise check them out CRLF, which a strict POSIX sh (dash, CI containers)
+#
-# rejects at the shebang.
+# This file is the policy, not each machine's git config. Git for Windows installs
+# with core.autocrlf=true, which checks text out as CRLF; an attribute here beats
+# that setting, so a fresh clone gets LF regardless of how its machine is set up.
+#
+# It matters beyond tidiness. tools/branding-sites.tsv is read line by line with
+# `read`, and under CRLF every row's last field gained a trailing CR byte - so the
+# branding checker reported all 29 sites as missing on Windows while passing on the
+# Linux CI runner. text=auto leaves genuinely binary files alone.
+* text=auto eol=lf
+
+# Shell scripts are pinned explicitly as well: a strict POSIX sh (dash, CI
+# containers) rejects a CRLF shebang outright rather than misbehaving quietly.
 *.sh text eol=lf
+
+# The exception. cmd.exe misparses LF-only batch files around labels and long
+# lines, so these alone are checked out CRLF. The repository copy is still LF.
+*.bat text eol=crlf
+*.cmd text eol=crlf

.github/workflows/ci.yaml

@@ -10,8 +10,24 @@ on:
       - 'Cargo.lock'
       - 'bundler.toml'
       - 'tools/**'
+      # This workflow validates itself: a broken step, a moved script path or a
+      # wrong runner label then fails loudly on the commit that caused it, rather
+      # than surfacing later against an unrelated source change. Note the limit -
+      # it checks the job body, not the trigger block above. Break `on:` and the
+      # symptom is silence, which looks like success.
+      - '.github/workflows/**'
+  # Mirrors the push filter. Without it a PR touching only the README would run a
+  # full build - the branch filter alone constrains where, not what.
   pull_request:
     branches: [ master ]
+    paths:
+      - 'src/**'
+      - 'xtask/**'
+      - 'Cargo.toml'
+      - 'Cargo.lock'
+      - 'bundler.toml'
+      - 'tools/**'
+      - '.github/workflows/**'
   workflow_dispatch:
 
 # Target the self-hosted Rust/audio runner registered to the `musiikki` org.

Cargo.toml

@@ -17,6 +17,14 @@ members = ["xtask"]
 # `cdylib` is the plugin binary; `lib` (rlib) lets `cargo test` link the unit tests.
 crate-type = ["cdylib", "lib"]
 
+# Future-incompatibility warnings are deferred hard errors: rustc is telling you
+# this code stops compiling on some later release. Denying the group turns that
+# into a build failure the day it appears, rather than 16 of them accumulating
+# unnoticed until a toolchain bump breaks the build on a day you did not choose.
+# Style and clippy lints are deliberately untouched - they stay warnings.
+[lints.rust]
+future_incompatible = { level = "deny", priority = -1 }
+
 [dependencies]
 # Pinned to the exact commit of the local ./nih-plug reference clone so the build
 # is reproducible and matches the examples we read from. Bump the `rev` together

src/editor/crossover.rs

@@ -131,7 +131,7 @@ fn handle(
     }
 
     let col = if resp.dragged() || resp.hovered() { palette::TEXT_HOVER } else { color };
-    p.line_segment([pos2(x, top), pos2(x, bottom)], Stroke::new(2.0, col));
+    p.line_segment([pos2(x, top), pos2(x, bottom)], Stroke::new(2.0_f32, col));
     p.text(pos2(x, bottom - 1.0), Align2::CENTER_BOTTOM, fmt_hz(hz), FontId::proportional(10.0), palette::TEXT_BRIGHT);
 }
 

src/editor/gain_curve.rs

@@ -52,14 +52,14 @@ pub(super) fn draw(ui: &mut egui::Ui, params: &Bari206Params, selected: usize, m
     let g6 = palette::GRID_FAINT;
     let x6 = x_for(-6.0);
     let y6 = y_for(-6.0);
-    p.line_segment([pos2(x6, top), pos2(x6, bottom)], Stroke::new(1.0, g6));
+    p.line_segment([pos2(x6, top), pos2(x6, bottom)], Stroke::new(1.0_f32, g6));
-    p.line_segment([pos2(left, y6), pos2(right, y6)], Stroke::new(1.0, g6));
+    p.line_segment([pos2(left, y6), pos2(right, y6)], Stroke::new(1.0_f32, g6));
 
     // Unity reference (out = in), bottom-left to top-right.
-    p.line_segment([pos2(left, bottom), pos2(right, top)], Stroke::new(1.0, palette::GRID));
+    p.line_segment([pos2(left, bottom), pos2(right, top)], Stroke::new(1.0_f32, palette::GRID));
     // Threshold marker on the input axis — shifted left by pre-gain (the comp sees in + pre).
     let tx = x_for((threshold - pre).clamp(FLOOR_DB, 0.0));
-    p.line_segment([pos2(tx, top), pos2(tx, bottom)], Stroke::new(1.0, palette::THRESHOLD_LINE));
+    p.line_segment([pos2(tx, top), pos2(tx, bottom)], Stroke::new(1.0_f32, palette::THRESHOLD_LINE));
 
     // Full wet transfer: drive into the comp, then makeup. (Mix not folded in.)
     let n = 96;
@@ -93,7 +93,7 @@ pub(super) fn draw(ui: &mut egui::Ui, params: &Bari206Params, selected: usize, m
         ));
     }
 
-    p.add(egui::Shape::line(pts, Stroke::new(1.6, palette::CURVE)));
+    p.add(egui::Shape::line(pts, Stroke::new(1.6_f32, palette::CURVE)));
 
     // Operating-point dot, on the curve at the current input.
     let driven = ext_in + pre;

src/editor/palette.rs

@@ -243,23 +243,23 @@ pub fn apply_visuals(ctx: &nih_plug_egui::egui::Context) {
     let w = &mut v.widgets;
     w.noninteractive.bg_fill = SURFACE_RAISED;
     w.noninteractive.weak_bg_fill = SURFACE_RAISED;
-    w.noninteractive.bg_stroke = Stroke::new(1.0, GRID_FAINT);
+    w.noninteractive.bg_stroke = Stroke::new(1.0_f32, GRID_FAINT);
-    w.noninteractive.fg_stroke = Stroke::new(1.0, TEXT);
+    w.noninteractive.fg_stroke = Stroke::new(1.0_f32, TEXT);
 
     w.inactive.bg_fill = TRACK;
     w.inactive.weak_bg_fill = TRACK;
-    w.inactive.bg_stroke = Stroke::new(1.0, GRID);
+    w.inactive.bg_stroke = Stroke::new(1.0_f32, GRID);
-    w.inactive.fg_stroke = Stroke::new(1.0, TEXT_BRIGHT);
+    w.inactive.fg_stroke = Stroke::new(1.0_f32, TEXT_BRIGHT);
 
     w.hovered.bg_fill = accent.edge;
     w.hovered.weak_bg_fill = accent.strip;
-    w.hovered.bg_stroke = Stroke::new(1.0, accent.edge);
+    w.hovered.bg_stroke = Stroke::new(1.0_f32, accent.edge);
-    w.hovered.fg_stroke = Stroke::new(1.0, TEXT_HOVER);
+    w.hovered.fg_stroke = Stroke::new(1.0_f32, TEXT_HOVER);
 
     w.active.bg_fill = accent.handle;
     w.active.weak_bg_fill = accent.edge;
-    w.active.bg_stroke = Stroke::new(1.0, accent.handle);
+    w.active.bg_stroke = Stroke::new(1.0_f32, accent.handle);
-    w.active.fg_stroke = Stroke::new(1.0, TEXT_HOVER);
+    w.active.fg_stroke = Stroke::new(1.0_f32, TEXT_HOVER);
 
     ctx.set_visuals(v);
 }

src/editor/plot.rs

@@ -170,7 +170,7 @@ pub(super) fn draw(ui: &mut egui::Ui, meters: &Meters, state: &mut PlotState) {
     // Gridlines (dB).
     for &g in &[0.0f32, -12.0, -24.0, -48.0] {
         let y = y_for_db(g);
-        p.line_segment([pos2(left, y), pos2(right, y)], Stroke::new(1.0, palette::GRID_FAINT));
+        p.line_segment([pos2(left, y), pos2(right, y)], Stroke::new(1.0_f32, palette::GRID_FAINT));
         p.text(
             pos2(left + 2.0, y),
             Align2::LEFT_BOTTOM,
@@ -204,7 +204,7 @@ pub(super) fn draw(ui: &mut egui::Ui, meters: &Meters, state: &mut PlotState) {
                     ));
                 }
             }
-            p.add(egui::Shape::line(pts, Stroke::new(1.5, color)));
+            p.add(egui::Shape::line(pts, Stroke::new(1.5_f32, color)));
         };
         draw_series(&state.history.in_db[c], &|db| db, COLOR_IN, true);
         draw_series(&state.history.out_db[c], &|db| db, COLOR_OUT, true);