Retires the working codename now rather than at 1.0, because the two identity
constants a DAW uses to recognise a plugin across sessions can only be changed
for free while nothing has saved a project with it. Verified: zero references
to the plugin across all 69 FL project backups, under any identity string.
Derived spellings:
Cargo package codename_206 -> bari_206
bundle / DAW name Codename 206 |
206 prototype -> Bari 206 (unified; drops "prototype")
Rust types Codename206(Params) -> Bari206(Params)
CLAP_ID com.mikkeli.codename-206
-> org.novoyuuparosk.bari-206
VST3_CLASS_ID Codename206Maxi! -> Bari206Multiband
CLAP_ID moves to reverse-DNS on a domain actually controlled, and stops
disagreeing with a VENDOR that was already Novoyuuparosk. VST3_CLASS_ID stays
exactly 16 bytes and drops "Maxi", which sat close to Image-Line's Maximus and
Maximizer in the same product category.
Author identity converges on Mikkeli Matlock <mikkeli@novoyuuparosk.org>;
Cargo authors had been carrying a personal gmail address while Plugin::EMAIL
already used the org one. VENDOR stays Novoyuuparosk, which is the org rather
than the person, and copyright stays with the person.
Deliberately unchanged: the repo, its remote, the local directory and the
homepage URL all keep "codename-206". Renaming those buys nothing and costs a
Gitea rename, a remote rewrite and a directory move, so the bare "codename-206"
is current branding rather than residue - and is the one spelling the STALE
list must not contain.
Driven by check-branding.sh rather than by grep: setting the canonical block
listed all 26 sites, including .github/workflows/ci.yaml, which no explicit
check covered. That gap is now closed by a positive check on the CI bundle
command, so a future rename fails in seconds instead of after a full compile.
STALE now carries both the retired and the new spellings, so the next rename
is self-checking too.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LU1NRL7fAaZTtFMTTPn2b1
Commit 057d630 switched this repo from GPL-3.0 to Apache-2.0, which the
build contradicts: src/lib.rs calls nih_export_vst3! unconditionally and
nih_plug is taken with default features, so every build links vst3-sys —
GPLv3-or-later by its own authors' choice. deploy.ps1 then installs that
binary. The declared licence and the artifact's actual terms disagreed,
and the original GPL-3.0 was correct.
Given the intent to distribute non-profit and open-source, GPL costs
nothing here, so this restores it rather than dropping VST3 to keep a
permissive licence.
Also adds the ISC notice owed to Robbert van der Helm: the plugin
scaffolding derives from the NIH-plug cookiecutter template and example
plugins, whose one condition is that the copyright and permission notice
travel with all copies. The README credited the template under Reference
Material, which is courtesy, not compliance. ISC is GPL-compatible, so the
notice is retained in NOTICE rather than superseded.
Corrects the README's claim that Steinberg's SDK licence must be accepted
before distributing. No SDK source is vendored or redistributed, so there
is nothing to accept at build time. The binding constraint is vst3-sys's
GPLv3; Steinberg's trademark in "VST" is a separate regime that no source
licence resolves.
Copyright in the Irene <irene@novoyuuparosk.org> commits is held by the
repository owner (an agent identity), so no third-party agreement was
needed for this relicense.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01WHt4DykxXaQnyaJfyS8KCn
Add a per-channel input_level meter (post pre-gain, peak-with-decay) and use it
to shade the gain curve: a translucent fill under the curve from the floor up to
the current input, its right edge riding the curve (width = input, height =
output), plus a dot at the operating point. Add -6 dBFS reference lines on both
axes with a tick label.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add a per-channel below-threshold shaper composed in series ahead of the comp:
gain = low_shape(level) + comp(level + low_shape(level)). The compressor's
threshold now sees the shaped level, so a Low Slope boost lifts quiet material
up into compression (and a cut pulls it out). Anchored at the -60 dB silence
floor. Low Curve bends the shaper toward a bounded saturation so the serial
composition doesn't blow up (0 = straight line).
gain_computer split into comp_gain_db + low_gain_db and composed; shared with
the editor gain-curve display. Slider order rearranged to read in signal order
(pre-gain -> low shaper -> compressor -> output). Defaults (slope 1, curve 0)
reproduce the plain compressor; 17 tests pass.
Known: the bipolar behaviour isn't final yet (milestone commit).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Add editor/gain_curve.rs: a square panel beside the scrolling plot showing the
channel transfer (out vs in, -60..0 dB) for whichever channel the plot tab
selects. Plots the full wet path — out = (in + pre_gain) + gain_reduction + makeup
— using the shared Compressor::gain_computer (now pub) so it matches the DSP and
the GR meter. Unity-reference diagonal + threshold marker; mix not folded in.
Update README structure/status to reflect the editor/ widget module and the
completed Stage 6 visualisers.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the per-channel bypass toggle with a smoothed dry/wet `mix` (0..100%,
default 100%). The blend is applied at the compressor output:
out = delayed_input * ((1 - mix) + mix * wet_gain)
Dry and wet share the same delayed input, so it's phase-aligned (parallel
compression, no comb filtering). mix=0 is bit-identical to the old bypass.
The detector now runs even at mix 0, so the GR meter shows the wet gain
reduction regardless of mix, while the level/plot out trace reads the mixed
output. "Bands at 0% = simple full-band comp via All" still holds.
Update README + parameter docs (bypass -> mix).
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Replace the two plain crossover sliders with a horizontal log-frequency strip
(LOW/MID/HIGH) and two draggable handles, plus number boxes (double-click to
type). Handles and boxes enforce a dynamic limit so lo/mid never crosses
mid/hi, on top of each param's own range. Lives in the editor/ widget module.
Known limitation: the lo<=hi limit is editor-only, so host automation can write
the two params past each other (briefly inverting the mid band). The DSP clamps
to monotonic, but FL's automation can misbehave once inverted. Left as-is.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Move the egui editor from a single editor.rs into an editor/ module: mod.rs
(aggregator: create(), EditorState, layout, placeholder slider columns),
meter.rs (|L|GR|R| meters + ceiling lamp, owns MeterState), and plot.rs
(rolling in/out/GR plot, owns PlotState + PlotHistory). Each visualiser owns
its GUI state; the aggregator composes them. No behavior change.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Mikkeli Matlock
mikkeli
irene