codename-206/src/editor/plot.rs

//! Rolling input/output/gain-reduction plot with per-channel tabs and a flow-speed selector.
//!
//! Histories for all four channels run continuously (cheap), so switching tabs shows that
//! channel's existing history. It's fed by draining the audio thread's scope ring
//! ([`Meters::scope`], clocked at `BUCKET_HZ`), so the horizontal resolution is set by the bucket
//! rate rather than the editor frame rate. Buckets are folded into `PLOT_N` columns
//! (peak-preserving); `window_s` (the flow speed) sets how many buckets span each column.

use nih_plug::prelude::*;
use nih_plug_egui::egui::{self, pos2, vec2, Align2, Color32, CornerRadius, FontId, Rect, Sense, Stroke};

use super::METER_FLOOR_DB;
use crate::meters::{Meters, BUCKET_HZ, NUM_CHANNELS};

/// Height of the plot panel.
const PLOT_PANEL_H: f32 = 150.0;
/// Number of columns held in the history ring.
const PLOT_N: usize = 256;

const COLOR_IN: Color32 = Color32::from_rgb(90, 170, 235);
const COLOR_OUT: Color32 = Color32::from_rgb(90, 200, 110);
const COLOR_GR: Color32 = Color32::from_rgb(240, 150, 60);

/// Rolling history for all channels: a per-channel ring of (in_db, out_db, gr_db) columns.
struct PlotHistory {
    in_db: [[f32; PLOT_N]; NUM_CHANNELS],
    out_db: [[f32; PLOT_N]; NUM_CHANNELS],
    gr_db: [[f32; PLOT_N]; NUM_CHANNELS],
    /// Per-column flag: the output limiter hit the ceiling somewhere in this column.
    hit: [bool; PLOT_N],
    write: usize,
    len: usize,
}

impl Default for PlotHistory {
    fn default() -> Self {
        Self {
            in_db: [[METER_FLOOR_DB; PLOT_N]; NUM_CHANNELS],
            out_db: [[METER_FLOOR_DB; PLOT_N]; NUM_CHANNELS],
            gr_db: [[0.0; PLOT_N]; NUM_CHANNELS],
            hit: [false; PLOT_N],
            write: 0,
            len: 0,
        }
    }
}

impl PlotHistory {
    /// Append one column of (in_db, out_db, gr_db) per channel, plus the ceiling-hit flag.
    fn push(&mut self, samples: &[(f32, f32, f32); NUM_CHANNELS], hit: bool) {
        for i in 0..NUM_CHANNELS {
            self.in_db[i][self.write] = samples[i].0;
            self.out_db[i][self.write] = samples[i].1;
            self.gr_db[i][self.write] = samples[i].2;
        }
        self.hit[self.write] = hit;
        self.write = (self.write + 1) % PLOT_N;
        self.len = (self.len + 1).min(PLOT_N);
    }
}

/// GUI-side state for the plot: selected channel, history ring, ring-drain cursor, and the
/// column being assembled from drained buckets.
pub(super) struct PlotState {
    /// Channel shown in the plot (0..NUM_CHANNELS: low/mid/high/all). Also drives the gain curve.
    pub(super) selected: usize,
    history: PlotHistory,
    /// Seconds of history shown across the full plot width — the flow speed (smaller = faster).
    window_s: f64,
    /// Read position into the scope ring; `None` until the first frame (then starts at "now").
    cursor: Option<u64>,
    /// Per-channel max accumulator (in_db, out_db, gr_db) for the column currently being built.
    col_acc: [(f32, f32, f32); NUM_CHANNELS],
    /// Ceiling-hit flag accumulated for the column currently being built.
    col_hit: bool,
    /// Buckets folded into the current column so far (fractional — a column may span <1 bucket).
    col_fill: f64,
}

impl Default for PlotState {
    fn default() -> Self {
        Self {
            selected: 0,
            history: PlotHistory::default(),
            window_s: 5.0,
            cursor: None,
            col_acc: [(METER_FLOOR_DB, METER_FLOOR_DB, 0.0); NUM_CHANNELS],
            col_hit: false,
            col_fill: 0.0,
        }
    }
}

/// Draw the scrolling in/out/gain-reduction plot for the selected channel, plus the channel tabs
/// and flow-speed selector. History for all channels advances every frame regardless of the tab.
pub(super) fn draw(ui: &mut egui::Ui, meters: &Meters, state: &mut PlotState) {
    // Buckets that make up one column at the current flow speed (may be fractional).
    let buckets_per_col = (state.window_s * BUCKET_HZ as f64 / PLOT_N as f64).max(1e-6);

    // Drain every bucket produced since the last frame (audio-clocked), folding them into columns.
    // A fresh cursor starts at "now" so we don't replay stale buckets.
    {
        let w0 = meters.scope.write_index();
        let cursor = state.cursor.get_or_insert(w0);
        let history = &mut state.history;
        let col_acc = &mut state.col_acc;
        let col_hit = &mut state.col_hit;
        let col_fill = &mut state.col_fill;
        meters.scope.drain(cursor, |in_lin, out_lin, gr_db, hit| {
            for ch in 0..NUM_CHANNELS {
                col_acc[ch].0 = col_acc[ch].0.max(util::gain_to_db(in_lin[ch]));
                col_acc[ch].1 = col_acc[ch].1.max(util::gain_to_db(out_lin[ch]));
                col_acc[ch].2 = col_acc[ch].2.max(gr_db[ch]);
            }
            *col_hit |= hit > 0.5;
            *col_fill += 1.0;
            while *col_fill >= buckets_per_col {
                history.push(col_acc, *col_hit);
                *col_acc = [(METER_FLOOR_DB, METER_FLOOR_DB, 0.0); NUM_CHANNELS];
                *col_hit = false;
                *col_fill -= buckets_per_col;
            }
        });
    }

    // Channel tabs + flow-speed selector + legend.
    let labels = ["LOW", "MID", "HIGH", "ALL"];
    let speeds = [2.0f64, 5.0, 15.0, 45.0];
    ui.horizontal(|ui| {
        ui.label("Plot:");
        for (i, l) in labels.iter().enumerate() {
            ui.selectable_value(&mut state.selected, i, *l);
        }
        ui.separator();
        ui.label("Speed:");
        let mut speed_changed = false;
        for &w in &speeds {
            if ui.selectable_value(&mut state.window_s, w, format!("{w:.0}s")).changed() {
                speed_changed = true;
            }
        }
        if speed_changed {
            // Cadence changed: start the history fresh so the time axis is consistent.
            state.history = PlotHistory::default();
            state.col_acc = [(METER_FLOOR_DB, METER_FLOOR_DB, 0.0); NUM_CHANNELS];
            state.col_hit = false;
            state.col_fill = 0.0;
        }
        ui.separator();
        ui.colored_label(COLOR_IN, "in");
        ui.colored_label(COLOR_OUT, "out");
        ui.colored_label(COLOR_GR, "GR");
    });

    let (rect, _) =
        ui.allocate_exact_size(vec2(ui.available_width(), PLOT_PANEL_H), Sense::hover());
    let p = ui.painter_at(rect);
    p.rect_filled(rect, CornerRadius::ZERO, Color32::from_rgb(16, 16, 20));

    let (top, bottom, left, right) =
        (rect.top() + 4.0, rect.bottom() - 4.0, rect.left() + 4.0, rect.right() - 4.0);
    let width = right - left;
    let y_for_db = |db: f32| -> f32 {
        let frac = ((db - METER_FLOOR_DB) / -METER_FLOOR_DB).clamp(0.0, 1.0);
        bottom - frac * (bottom - top)
    };

    // Gridlines (dB).
    for &g in &[0.0f32, -12.0, -24.0, -48.0] {
        let y = y_for_db(g);
        p.line_segment([pos2(left, y), pos2(right, y)], Stroke::new(1.0, Color32::from_gray(40)));
        p.text(
            pos2(left + 2.0, y),
            Align2::LEFT_BOTTOM,
            format!("{g:.0}"),
            FontId::proportional(9.0),
            Color32::from_gray(90),
        );
    }

    let c = state.selected.min(NUM_CHANNELS - 1);
    let (write, len) = (state.history.write, state.history.len);
    if len >= 2 {
        let draw_series = |series: &[f32; PLOT_N], to_db: &dyn Fn(f32) -> f32, color: Color32, fill: bool| {
            let mut pts = Vec::with_capacity(len);
            for k in 0..len {
                let idx = (write + PLOT_N - len + k) % PLOT_N;
                let pos = (PLOT_N - len + k) as f32 / (PLOT_N - 1) as f32; // newest hugs the right
                pts.push(pos2(left + pos * width, y_for_db(to_db(series[idx]))));
            }
            if fill {
                // Fill as a strip of per-segment convex quads down to the baseline. A single
                // concave polygon mis-tessellates in egui (it fans from one corner, leaving stray
                // triangles), so build convex pieces — one box per time unit — instead.
                let fill_col = Color32::from_rgba_unmultiplied(color.r(), color.g(), color.b(), 40);
                for seg in pts.windows(2) {
                    let (a, b) = (seg[0], seg[1]);
                    p.add(egui::Shape::convex_polygon(
                        vec![pos2(a.x, bottom), pos2(a.x, a.y), pos2(b.x, b.y), pos2(b.x, bottom)],
                        fill_col,
                        Stroke::NONE,
                    ));
                }
            }
            p.add(egui::Shape::line(pts, Stroke::new(1.5, color)));
        };
        draw_series(&state.history.in_db[c], &|db| db, COLOR_IN, true);
        draw_series(&state.history.out_db[c], &|db| db, COLOR_OUT, true);
        // GR hangs from the 0 dB line: a reduction of X dB is drawn at the -X gridline.
        draw_series(&state.history.gr_db[c], &|gr| -gr, COLOR_GR, false);

        // Ceiling-hit markers: a short red tick at the TOP for any column where the output limiter
        // hit the ceiling (global — shown on every channel's view). One column wide, so runs of
        // hits merge into a continuous segment and a lone hit is just a dot. Nothing otherwise.
        let dx = width / (PLOT_N - 1) as f32;
        let marker = Color32::from_rgb(235, 45, 45);
        for k in 0..len {
            let idx = (write + PLOT_N - len + k) % PLOT_N;
            if state.history.hit[idx] {
                let pos = (PLOT_N - len + k) as f32 / (PLOT_N - 1) as f32;
                let x = left + pos * width;
                p.rect_filled(Rect::from_min_max(pos2(x, top), pos2(x + dx, top + 3.0)), CornerRadius::ZERO, marker);
            }
        }
    }
}